Buy Direct from the Source
KRK1 - King Ranch Color Dye Kit #1
KRK1 - King Ranch Color Dye Kit #1
KRK1 - King Ranch Color Dye Kit #1
KRK1 - King Ranch Color Dye Kit #1

KRK1 - King Ranch Color Dye Kit #1

Water-borne penetrating dye for coloring King Ranch aniline leather. Easily colors the front two seats. For the back seats, add another 8 oz. of color.

+
  • 1 - 8 oz. Triclean Prep Cleaner (TC) 
  • 1 - 8 oz. King Ranch Aniline Color (AN708, AN709 or AN710)
  • 1 - 1/4 oz. Super Link Crosslinker (SL7) 

Easy to apply color for restoring aniline leather back the original look & feel.

Remove stains as much as possible. Spray a wet coat with (TC) Triclean Prep Cleaner over the entire area. Use a soft nylon brush to lightly scrub clean. Blot dry with a clean lint free towel or paper towel. Allow to dry completely. Use a hair dryer to speed up the drying process.

Check the leathers ability for penetration by placing a drop of water on several areas. Wait for minute, if the water leaves a dark circle, then the leather will allow the aniline dye to penetrate into the leather fiber. If the water beads up with no dark circle, a second or third cleaning is required.

After the third cleaning and the water still beads up with no dark circle, lightly sand the leather with 600# sandpaper. This will help to break the surface coating and allow penetration. Clean again with (TC) triclean prep cleaner and a soft cloth or paper towel.

Aniline leather finish (unprotected).

Colors: AN708, AN709, AN710

  1. Check color match. Mix 3%  crosslinker (SL7) 1/4oz per 8oz of color)into the aniline dye color, helps to set the dye, (**ALWAYS ADD**). 
  2. Apply a light coat of the aniline dye color by spray, wipe on or brush on method.
  3. Allow to dry. A hair dryer may be used to speed drying.
  4. Apply additional coats as needed, allowing each coat of color to dry to touch.
  5. To slightly increase the gloss, apply a top coat clear of aniline clear (AN) mixed with crosslinker (SL7) 1/4oz per 8oz of clear.

Always add 3% Super Link Crosslinker (SL7). Makes the color permanent. 

Kit Includes

  • 1 - 8 oz. Triclean Prep Cleaner (TC) 
  • 1 - 8 oz. King Ranch Aniline Color (AN708, AN709 or AN710)
  • 1 - 1/4 oz. Super Link Crosslinker (SL7) 

Features

Easy to apply color for restoring aniline leather back the original look & feel.

Prep Cleaning

Remove stains as much as possible. Spray a wet coat with (TC) Triclean Prep Cleaner over the entire area. Use a soft nylon brush to lightly scrub clean. Blot dry with a clean lint free towel or paper towel. Allow to dry completely. Use a hair dryer to speed up the drying process.

Check the leathers ability for penetration by placing a drop of water on several areas. Wait for minute, if the water leaves a dark circle, then the leather will allow the aniline dye to penetrate into the leather fiber. If the water beads up with no dark circle, a second or third cleaning is required.

After the third cleaning and the water still beads up with no dark circle, lightly sand the leather with 600# sandpaper. This will help to break the surface coating and allow penetration. Clean again with (TC) triclean prep cleaner and a soft cloth or paper towel.

Application

Aniline leather finish (unprotected).

Colors: AN708, AN709, AN710

  1. Check color match. Mix 3%  crosslinker (SL7) 1/4oz per 8oz of color)into the aniline dye color, helps to set the dye, (**ALWAYS ADD**). 
  2. Apply a light coat of the aniline dye color by spray, wipe on or brush on method.
  3. Allow to dry. A hair dryer may be used to speed drying.
  4. Apply additional coats as needed, allowing each coat of color to dry to touch.
  5. To slightly increase the gloss, apply a top coat clear of aniline clear (AN) mixed with crosslinker (SL7) 1/4oz per 8oz of clear.

Additives

Always add 3% Super Link Crosslinker (SL7). Makes the color permanent. 

How To Video

Select your vehicle