Buy Direct from the Source
King Ranch Colors
King Ranch Colors
King Ranch Colors
King Ranch Colors

King Ranch Colors

Note: See the color name and picture in the image tab.

+

A water-borne penetrating dye for coloring King Ranch aniline and semi-aniline leather.

Easy to apply. Original look & feel.

Match color, then add #SL-7 crosslinker (1/4oz per 8oz of color) . Remove stains as much as possible (#TC- triclean prep cleaner works well, allow to dry). Spray a light coat, allow to dry, then check for feel of leather. Spray additional coats as needed. To increase gloss, spray a coat of crosslinked aniline clear base.

#SL-7 super crosslinker (always add - 1/4 oz per 8oz of color).

Remove stains as much as possible. Spray a wet coat with (TC) Triclean Prep Cleaner over the entire area. Use a soft nylon brush to lightly scrub clean. Blot dry with a clean lint free towel or paper towel. Allow to dry completely. Use a hair dryer to speed up the drying process. Lightly sand the leather with #600 sandpaper. This will help to break the surface coating and allow penetration (always sand before using color #SAC-707).

Check the leathers ability for penetration by placing a drop of water on several areas. Wait for minute, if the water leaves a dark circle, then the leather will accept aniline dye. If the water beads up with no dark circle, a second or third cleaning is required.

Semi-aniline leather finish.Color: SAC-707 Chaparrel.

This color has a semi-aniline finish. A light topcoat protective clear is applied by the factory over the color to help resist staining.

After prep cleaning, a light sanding with #600 sandpaper is required to remove the protective topcoat.

  1. Check color match. Mix #SL-7 crosslinker (1/4oz per 8oz of color). into the semi-aniline dye color.
  2. Apply a light coat of the semi-aniline dye color by spray, wipe on or brush on method.
  3. Allow to dry. A hair dryer may be used to speed drying.
  4. Apply additional coats as needed, allowing each coat of color to dry to touch.
  5. To slightly increase the gloss, apply a top coat clear of #SAC - semi- aniline clear mixed with crosslinker (#SL-7 - 1/4oz per 8oz of color).

Always add #SL-7 super crosslinker (1/4oz per 8oz of color). Makes the color permanent.CLEANING: #TC - Triclean prep cleanerTOPCOAT CLEAR: #SAC - semi-aniline clear base (always add 2% #SL-7 crosslinker)

Description

A water-borne penetrating dye for coloring King Ranch aniline and semi-aniline leather.

Features

Easy to apply. Original look & feel.

Application

Match color, then add #SL-7 crosslinker (1/4oz per 8oz of color) . Remove stains as much as possible (#TC- triclean prep cleaner works well, allow to dry). Spray a light coat, allow to dry, then check for feel of leather. Spray additional coats as needed. To increase gloss, spray a coat of crosslinked aniline clear base.

Additives

#SL-7 super crosslinker (always add - 1/4 oz per 8oz of color).

Prep Cleaning

Remove stains as much as possible. Spray a wet coat with (TC) Triclean Prep Cleaner over the entire area. Use a soft nylon brush to lightly scrub clean. Blot dry with a clean lint free towel or paper towel. Allow to dry completely. Use a hair dryer to speed up the drying process. Lightly sand the leather with #600 sandpaper. This will help to break the surface coating and allow penetration (always sand before using color #SAC-707).

Check the leathers ability for penetration by placing a drop of water on several areas. Wait for minute, if the water leaves a dark circle, then the leather will accept aniline dye. If the water beads up with no dark circle, a second or third cleaning is required.

Application

Semi-aniline leather finish.Color: SAC-707 Chaparrel.

This color has a semi-aniline finish. A light topcoat protective clear is applied by the factory over the color to help resist staining.

After prep cleaning, a light sanding with #600 sandpaper is required to remove the protective topcoat.

  1. Check color match. Mix #SL-7 crosslinker (1/4oz per 8oz of color). into the semi-aniline dye color.
  2. Apply a light coat of the semi-aniline dye color by spray, wipe on or brush on method.
  3. Allow to dry. A hair dryer may be used to speed drying.
  4. Apply additional coats as needed, allowing each coat of color to dry to touch.
  5. To slightly increase the gloss, apply a top coat clear of #SAC - semi- aniline clear mixed with crosslinker (#SL-7 - 1/4oz per 8oz of color).

Additives

Always add #SL-7 super crosslinker (1/4oz per 8oz of color). Makes the color permanent.CLEANING: #TC - Triclean prep cleanerTOPCOAT CLEAR: #SAC - semi-aniline clear base (always add 2% #SL-7 crosslinker)

Select your vehicle