KRK1 - King Ranch Color Dye Kit #1
Water-borne penetrating dye for coloring King Ranch aniline leather. Easily colors the front two seats. For the back seats, add another 8 oz. of color.
- Kit Includes
- Features
- Prep Cleaning
- Application
- Additives
- How To Video
- 1 - 8 oz. Triclean Prep Cleaner (TC)
- 1 - 8 oz. King Ranch Aniline Color (AN708, AN709 or AN710)
- 1 - 1/4 oz. Super Link Crosslinker (SL7)
Easy to apply color for restoring aniline leather back the original look & feel.
Remove stains as much as possible. Spray a wet coat with (TC) Triclean Prep Cleaner over the entire area. Use a soft nylon brush to lightly scrub clean. Blot dry with a clean lint free towel or paper towel. Allow to dry completely. Use a hair dryer to speed up the drying process.
Check the leathers ability for penetration by placing a drop of water on several areas. Wait for minute, if the water leaves a dark circle, then the leather will allow the aniline dye to penetrate into the leather fiber. If the water beads up with no dark circle, a second or third cleaning is required.
After the third cleaning and the water still beads up with no dark circle, lightly sand the leather with 600# sandpaper. This will help to break the surface coating and allow penetration. Clean again with (TC) triclean prep cleaner and a soft cloth or paper towel.
Aniline leather finish (unprotected).
Colors: AN708, AN709, AN710
- Check color match. Mix 3% crosslinker (SL7) 1/4oz per 8oz of color)into the aniline dye color, helps to set the dye, (**ALWAYS ADD**).
- Apply a light coat of the aniline dye color by spray, wipe on or brush on method.
- Allow to dry. A hair dryer may be used to speed drying.
- Apply additional coats as needed, allowing each coat of color to dry to touch.
- To slightly increase the gloss, apply a top coat clear of aniline clear (AN) mixed with crosslinker (SL7) 1/4oz per 8oz of clear.
Always add 3% Super Link Crosslinker (SL7). Makes the color permanent.
Kit Includes
- 1 - 8 oz. Triclean Prep Cleaner (TC)
- 1 - 8 oz. King Ranch Aniline Color (AN708, AN709 or AN710)
- 1 - 1/4 oz. Super Link Crosslinker (SL7)
Features
Easy to apply color for restoring aniline leather back the original look & feel.
Prep Cleaning
Remove stains as much as possible. Spray a wet coat with (TC) Triclean Prep Cleaner over the entire area. Use a soft nylon brush to lightly scrub clean. Blot dry with a clean lint free towel or paper towel. Allow to dry completely. Use a hair dryer to speed up the drying process.
Check the leathers ability for penetration by placing a drop of water on several areas. Wait for minute, if the water leaves a dark circle, then the leather will allow the aniline dye to penetrate into the leather fiber. If the water beads up with no dark circle, a second or third cleaning is required.
After the third cleaning and the water still beads up with no dark circle, lightly sand the leather with 600# sandpaper. This will help to break the surface coating and allow penetration. Clean again with (TC) triclean prep cleaner and a soft cloth or paper towel.
Application
Aniline leather finish (unprotected).
Colors: AN708, AN709, AN710
- Check color match. Mix 3% crosslinker (SL7) 1/4oz per 8oz of color)into the aniline dye color, helps to set the dye, (**ALWAYS ADD**).
- Apply a light coat of the aniline dye color by spray, wipe on or brush on method.
- Allow to dry. A hair dryer may be used to speed drying.
- Apply additional coats as needed, allowing each coat of color to dry to touch.
- To slightly increase the gloss, apply a top coat clear of aniline clear (AN) mixed with crosslinker (SL7) 1/4oz per 8oz of clear.
Additives
Always add 3% Super Link Crosslinker (SL7). Makes the color permanent.
How To Video
- Vinyl
- Carpet
- Furniture
- Aniline