Buy Direct from the Source
KRK2 - King Ranch Chaparrel Color Dye Kit #2
KRK2 - King Ranch Chaparrel Color Dye Kit #2

KRK2 - King Ranch Chaparrel Color Dye Kit #2

A water-borne penetrating dye for coloring semi-aniline 2008 - 2014 King Ranch chaparral color leather. Easily colors the front two seats. For the back seats, add another 8 oz. of color.

+
  • 1 - 8 oz. Triclean Prep Cleaner (TC) 
  • 1 - 8 oz. King Ranch Semi-Aniline Color (SAC707 Chaparrel)
  • 1 - 1/4 oz. Super Link Crosslinker (SL7)

Easy to apply. Original look & feel.

Remove stains as much as possible. Spray a wet coat with Triclean Prep Cleaner (TC) over the entire area. Use a soft nylon brush to lightly scrub clean. Blot dry with a clean lint free towel or paper towel. Allow to dry completely. Use a hair dryer to speed up the drying process.

Lightly sand the leather with 600# sandpaper. This will help to break the surface coating and allow penetration (always sand leather before using color SAC-707 Chaparrel).

Check the leathers ability for penetration by placing a drop of water on several areas. Wait for minute, if the water leaves a dark circle, then the leather will accept semi-aniline dye. If the water beads up with no dark circle, a second or third cleaning is required.

Semi-aniline leather finish. Color: SAC-707 Chaparrel.

This color has a semi-aniline finish. A light topcoat protective clear is applied by the factory over the color to help resist staining.

After prep cleaning, a light sanding with 600# sandpaper is required to remove the protective topcoat.

1) Check color match. Mix Super Link Crosslinker (SL-7) 1/4 oz per 8 oz of color into the semi-aniline dye color. 

2) Apply a light coat of the semi-aniline dye color by spray, wipe on or brush on method. 

3) Allow to dry. A hair dryer may be used to speed drying.

4) Apply additional coats as needed, allow each coat of color to dry to touch.

5) To slightly increase the gloss, apply a top coat clear of Semi-Aniline Clear (SAC) mixed with Super Link Crosslinker (SL-7) (1/4 oz per 8 oz of clear). 

Cleaning: Triclean Prep Cleaner (TC).

Topcoat Clear: Semi-Aniline Clear Base (SAC) .

Note: Always add Super Link Crosslinker (SL7), 1/4 oz per 8 oz of color or topcoat clear. Makes the color permanent.

Kit Includes

  • 1 - 8 oz. Triclean Prep Cleaner (TC) 
  • 1 - 8 oz. King Ranch Semi-Aniline Color (SAC707 Chaparrel)
  • 1 - 1/4 oz. Super Link Crosslinker (SL7)

Features

Easy to apply. Original look & feel.

Prep Cleaning

Remove stains as much as possible. Spray a wet coat with Triclean Prep Cleaner (TC) over the entire area. Use a soft nylon brush to lightly scrub clean. Blot dry with a clean lint free towel or paper towel. Allow to dry completely. Use a hair dryer to speed up the drying process.

Lightly sand the leather with 600# sandpaper. This will help to break the surface coating and allow penetration (always sand leather before using color SAC-707 Chaparrel).

Check the leathers ability for penetration by placing a drop of water on several areas. Wait for minute, if the water leaves a dark circle, then the leather will accept semi-aniline dye. If the water beads up with no dark circle, a second or third cleaning is required.

Application

Semi-aniline leather finish. Color: SAC-707 Chaparrel.

This color has a semi-aniline finish. A light topcoat protective clear is applied by the factory over the color to help resist staining.

After prep cleaning, a light sanding with 600# sandpaper is required to remove the protective topcoat.

1) Check color match. Mix Super Link Crosslinker (SL-7) 1/4 oz per 8 oz of color into the semi-aniline dye color. 

2) Apply a light coat of the semi-aniline dye color by spray, wipe on or brush on method. 

3) Allow to dry. A hair dryer may be used to speed drying.

4) Apply additional coats as needed, allow each coat of color to dry to touch.

5) To slightly increase the gloss, apply a top coat clear of Semi-Aniline Clear (SAC) mixed with Super Link Crosslinker (SL-7) (1/4 oz per 8 oz of clear). 

Additives

Cleaning: Triclean Prep Cleaner (TC).

Topcoat Clear: Semi-Aniline Clear Base (SAC) .

Note: Always add Super Link Crosslinker (SL7), 1/4 oz per 8 oz of color or topcoat clear. Makes the color permanent.

How To Video

Select your vehicle